Curve End of Wing

[bobthebuilderman]

Hi, this is my first post on the forum here.

Anyways, I wanted to ask how to curve the wings on my plane. I've seen some designs that have curved it. I'm also building a plane from scratch.

[Froggie]

By curve, do you mean literally curve or bring the tips up?

[bobthebuilderman]

I mean the end of the wing, like the tip.

Mine looks like -------
But I want it to look like \____/ (maybe not at that angle)

[Froggie]

I mean the end of the wing, like the tip.

Mine looks like -------
But I want it to look like \____/ (maybe not at that angle)

You could take a block of wood and glue the \ / to the main part of the wing while leaning the tips against the blocks.

[JasperKota]

Sounds like you're talking about dihedral tips. Wing tips also work well, though the shape is more like |____| - tips are perpendicular to the wing rather than a more obtuse angle. The method Froggie mentioned above is one way you can approach it. Make sure the blocks are the same height! Another way would be to first build the wing flat, then carefully break the leading and trailing edges at the same spots, angle them how you want it, add glue to secure it and put a block under while drying.