SO FAQ's

[coachchuckaahs]

FAQ's carry the same weight as the rulebook.

There are two new FAQ's for Heli:

https://www.soinc.org/can-helicopter-pa ... t-design-0. While they are confirming 3-D printing can be used, they also clarify that the disk on top MUST BE BALSA WOOD by rule! If you have a printed disk, such as AeroMartin's design, laminate a thin balsa disk on top or risk being tiered! I do not know why they insist on balsa, but they have now officially made it clear that this is a design requirement.

https://www.soinc.org/if-one-school-bri ... hool-share. Teams from the same school can share a measurement box


These are my interpretations of the FAQ's. Read them yourself, and if you are not clear, put in a further clarification request. My interpretation is only that, and is not official.

Coach Chuck