About our recent service interruption: We appreciate your patience during the downtime and will be continuing to monitor our servers to avoid similar interruptions in service. We apologize for any inconvenience this may have caused and we appreciate your understanding. We encourage users editing the Wiki to retain records of their edits in the event of another unexpected interruption.×
Nydauron wrote:Oh no! Dr. Doom has just finished building his capacitor! When designing the build he decided to make the plates have an area of 10 m^2 separated by 1 mm. As the dielectric, he used strontium titanate (k = 310). Dr. Doom plans on using his battery with an EMF = 20kV connected to a set of 20 parallel 100 Mohm resistors in series to charge the capacitor.
1) How long will it take to "fully" charge the capacitor?
2) How much charge will the capacitor hold when it reaches maximum voltage?
3) How much energy is stored in the charged capacitor? How much energy is lost during the process of charging the capacitor?
Is this correct?
C=K*e0*A/d
C=310*8.85e-12*10/.001
C=2.7435e-5 F
R eq=1/(20/1e8)=5e6 ohm
t charge=4*R*C
t charge=4*5e6*2.7435e-5
t charge=548.7 seconds, or [b]about 9 minutes[/b]. (charges to 98%)
Q=CV
Q=2.7435e-5*20000
Q=[b].5487 coulombs.[/b]
PE[sub]capacitor[/sub]=1/2*Q*V
PE capacitor=1/2*.5487*20000
PE capacitor=[b]5487 joules[/b].
PE dissipated=1/2*Q*V
PE dissipated=[b]5487 joules[/b].
2018: Hovercraft, Thermo, Coaster, Solar System
2019: Thermo, Circuit Lab, Sounds, Wright Stuff
2020: Circuit Lab, Wright Stuff, Machines
2021: Circuit Lab, Machines, WIDI, anything but Wright Stuff
Can I request that we delete 2020 from our memories and do it over again?
Nydauron wrote:Oh no! Dr. Doom has just finished building his capacitor! When designing the build he decided to make the plates have an area of 10 m^2 separated by 1 mm. As the dielectric, he used strontium titanate (k = 310). Dr. Doom plans on using his battery with an EMF = 20kV connected to a set of 20 parallel 100 Mohm resistors in series to charge the capacitor.
1) How long will it take to "fully" charge the capacitor?
2) How much charge will the capacitor hold when it reaches maximum voltage?
3) How much energy is stored in the charged capacitor? How much energy is lost during the process of charging the capacitor?
Is this correct?
C=K*e0*A/d
C=310*8.85e-12*10/.001
C=2.7435e-5 F
R eq=1/(20/1e8)=5e6 ohm
t charge=4*R*C
t charge=4*5e6*2.7435e-5
t charge=548.7 seconds, or [b]about 9 minutes[/b]. (charges to 98%)
Q=CV
Q=2.7435e-5*20000
Q=[b].5487 coulombs.[/b]
PE[sub]capacitor[/sub]=1/2*Q*V
PE capacitor=1/2*.5487*20000
PE capacitor=[b]5487 joules[/b].
PE dissipated=1/2*Q*V
PE dissipated=[b]5487 joules[/b].
In general, 5 time constants usually yield a fully charged capacitor. You just simply did 4 time constants which will charge the capacitor to 98% as you stated. It is practically the same, but I don't think people will count 98% as "full". ;)
With the change, you get:
[math]5 * \tau = 5(5* 10^6)(2.7435*10^{-5}) = 685.9[/math]
So, 685.9 seconds or 11 minutes and 25.9 seconds.
Either way, your turn!
Only slightly above average in algorithms
Conant'19 => UIUC'23
Physics is the only real science
Change my mind Nydauron's Userpage
Nydauron wrote:Oh no! Dr. Doom has just finished building his capacitor! When designing the build he decided to make the plates have an area of 10 m^2 separated by 1 mm. As the dielectric, he used strontium titanate (k = 310). Dr. Doom plans on using his battery with an EMF = 20kV connected to a set of 20 parallel 100 Mohm resistors in series to charge the capacitor.
1) How long will it take to "fully" charge the capacitor?
2) How much charge will the capacitor hold when it reaches maximum voltage?
3) How much energy is stored in the charged capacitor? How much energy is lost during the process of charging the capacitor?
Is this correct?
C=K*e0*A/d
C=310*8.85e-12*10/.001
C=2.7435e-5 F
R eq=1/(20/1e8)=5e6 ohm
t charge=4*R*C
t charge=4*5e6*2.7435e-5
t charge=548.7 seconds, or [b]about 9 minutes[/b]. (charges to 98%)
Q=CV
Q=2.7435e-5*20000
Q=[b].5487 coulombs.[/b]
PE[sub]capacitor[/sub]=1/2*Q*V
PE capacitor=1/2*.5487*20000
PE capacitor=[b]5487 joules[/b].
PE dissipated=1/2*Q*V
PE dissipated=[b]5487 joules[/b].
In general, 5 time constants usually yield a fully charged capacitor. You just simply did 4 time constants which will charge the capacitor to 98% as you stated. It is practically the same, but I don't think people will count 98% as "full". ;)
With the change, you get:
[math]5 * \tau = 5(5* 10^6)(2.7435*10^{-5}) = 685.9[/math]
So, 685.9 seconds or 11 minutes and 25.9 seconds.
Either way, your turn!
My resources said 4-time constants is considered full...
My resources said 4-time constants is considered full...
Literally every search I've done has said that it takes 5 time constants to "fully" charge just like it is shown in the top graph, but there are some images like this one that show the steady state period beginning at 4T even though they marked "fully" charged at 5T. What is this madness! :x
[img]https://www.electronics-tutorials.ws/rc/rc2.gif[/img]
Only slightly above average in algorithms
Conant'19 => UIUC'23
Physics is the only real science
Change my mind Nydauron's Userpage
My resources said 4-time constants is considered full...
Literally every search I've done has said that it takes 5 time constants to "fully" charge just like it is shown in the top graph, but there are some images like this one that show the steady state period beginning at 4T even though they marked "fully" charged at 5T. What is this madness! :x
[img]https://www.electronics-tutorials.ws/rc/rc2.gif[/img]
My resources said 4-time constants is considered full...
Literally every search I've done has said that it takes 5 time constants to "fully" charge just like it is shown in the top graph, but there are some images like this one that show the steady state period beginning at 4T even though they marked "fully" charged at 5T. What is this madness! :x
[img]https://www.electronics-tutorials.ws/rc/rc2.gif[/img]
that a capacitor will never truly reach full charge, without infinite time. Quick research finds that different websites use different values for accepted "full charge". I used four time constants, because that's what I was taught, but it may be different depending on the teacher/competition, I suppose. So both answers can be correct, based on context? Is this accurate?
2018: Hovercraft, Thermo, Coaster, Solar System
2019: Thermo, Circuit Lab, Sounds, Wright Stuff
2020: Circuit Lab, Wright Stuff, Machines
2021: Circuit Lab, Machines, WIDI, anything but Wright Stuff
Can I request that we delete 2020 from our memories and do it over again?
My resources said 4-time constants is considered full...
Literally every search I've done has said that it takes 5 time constants to "fully" charge just like it is shown in the top graph, but there are some images like this one that show the steady state period beginning at 4T even though they marked "fully" charged at 5T. What is this madness! :x
[img]https://www.electronics-tutorials.ws/rc/rc2.gif[/img]
that a capacitor will never truly reach full charge, without infinite time. Quick research finds that different websites use different values for accepted "full charge". I used four time constants, because that's what I was taught, but it may be different depending on the teacher/competition, I suppose. So both answers can be correct, based on context? Is this accurate?
both answers are correct then. Eh, we all live and learn. :)
Let's continue with the next question.
Only slightly above average in algorithms
Conant'19 => UIUC'23
Physics is the only real science
Change my mind Nydauron's Userpage
When connected to a 9.0 volt battery and a copper wire (resistivity 1.68e-8 ohm-meters, diameter 2.0 mm), a capacitor charges to a potential drop of 6.0 volts in 81.89 ps. The capacitor's plates are square, 5.0 meters to a side, and are separated by 1.0 millimeter of air (k=1.0). How long is the wire?
EDIT: Fixed bad sig figs.
2018: Hovercraft, Thermo, Coaster, Solar System
2019: Thermo, Circuit Lab, Sounds, Wright Stuff
2020: Circuit Lab, Wright Stuff, Machines
2021: Circuit Lab, Machines, WIDI, anything but Wright Stuff
Can I request that we delete 2020 from our memories and do it over again?
Creationist127 wrote:When connected to a 9.0 volt battery and a copper wire (resistivity 1.68e-8 ohm-meters, diameter 2.0 mm), a capacitor charges to a potential drop of 6.0 volts in 81.89 ps. The capacitor's plates are square, 5.0 meters to a side, and are separated by 1.0 millimeter of air (k=1.0). How long is the wire?
EDIT: Fixed bad sig figs.
Substituting for , , , , and ...
Now solving for ...
(2 sig figs)
Only slightly above average in algorithms
Conant'19 => UIUC'23
Physics is the only real science
Change my mind Nydauron's Userpage
Creationist127 wrote:When connected to a 9.0 volt battery and a copper wire (resistivity 1.68e-8 ohm-meters, diameter 2.0 mm), a capacitor charges to a potential drop of 6.0 volts in 81.89 ps. The capacitor's plates are square, 5.0 meters to a side, and are separated by 1.0 millimeter of air (k=1.0). How long is the wire?
EDIT: Fixed bad sig figs.
Substituting for , , , , and ...
Now solving for ...
(2 sig figs)
Correct. Your turn.
2018: Hovercraft, Thermo, Coaster, Solar System
2019: Thermo, Circuit Lab, Sounds, Wright Stuff
2020: Circuit Lab, Wright Stuff, Machines
2021: Circuit Lab, Machines, WIDI, anything but Wright Stuff
Can I request that we delete 2020 from our memories and do it over again?
