Scioly.org

Posted: **February 24th, 2016, 5:29 pm**

I don't know, I think I'm missing something. The worst I've seen was about 70-something volts...
What kind of resistor are you using?

Posted: **February 24th, 2016, 5:30 pm**

Oh, sorry! That's the raw voltage before I calculated with the resistor.

But 70 volts? Really? That seems high

Posted: **February 24th, 2016, 5:34 pm**

Um, I tried to calculate the voltage and got .2 volts. Clearly I've calculated wrong...

I put into the calculator: .35^2= .1225 x 5= .2

Posted: **February 24th, 2016, 6:18 pm**

Yeah 70 volts sounds pretty high

. Also if your raw voltage was 350 mV then with a 5 ohm resistor the power should be about .025 W although im not sure

Posted: **February 24th, 2016, 6:51 pm**

Maybe it was 70mV. I'm not really sure...

Is this picture from the scores thread mV then?

Posted: **February 25th, 2016, 4:42 am**

I think those scores might be in millivolts

I hope no one is generating 400 VOLTS...

Posted: **February 25th, 2016, 10:29 am**

yes, raw score value are mV, but event supervisor didn't bother to convert to V when entering the value on the spread sheet. But that shouldn't matter , using the spreadsheet from SOINC website, calculation and output is consistent. It may not be valid, but it's consistent

Posted: **February 25th, 2016, 3:19 pm**

double posted

Posted: **February 25th, 2016, 3:20 pm**

Does the resistor alter the raw voltage output?

Posted: **February 25th, 2016, 5:06 pm**

dragon_fruit35 wrote:Does the resistor alter the raw voltage output?

Having resistance will lower the power outcome but it wouldn't affect the voltage.

http://www.sengpielaudio.com/calculator-ohm.htm

Scioly.org

Wind Power B/C

Re: Wind Power B/C

Re: Wind Power B/C

Re: Wind Power B/C

Re: Wind Power B/C

Re: Wind Power B/C

Re: Wind Power B/C

Re: Wind Power B/C

Re: Wind Power B/C

Re: Wind Power B/C

Re: Wind Power B/C