Wright stuff minimum size
-
- Member
- Posts: 6
- Joined: January 2nd, 2018, 3:16 pm
- Has thanked: 0
- Been thanked: 0
- Unome
- Moderator
- Posts: 4327
- Joined: January 26th, 2014, 12:48 pm
- Division: Grad
- State: GA
- Has thanked: 231 times
- Been thanked: 83 times
Re: Wright stuff minimum size
As far as I can tell (from a quick reading of the rules), there are no minimum dimensions. There's not really a point to setting out minimum dimensions for this event since there's not really and advantage to a smaller plane, and it's one more thing for the event supervisor to check.
-
- Member
- Posts: 20
- Joined: January 2nd, 2018, 3:13 pm
- Has thanked: 0
- Been thanked: 0
-
- Member
- Posts: 6
- Joined: January 2nd, 2018, 3:16 pm
- Has thanked: 0
- Been thanked: 0
Re: Wright stuff minimum size
kk, prolly gonna make a peanut plane with large wings. Any warnings ("don't make the wingspan over _ cm!")?Unome wrote:As far as I can tell (from a quick reading of the rules), there are no minimum dimensions. There's not really a point to setting out minimum dimensions for this event since there's not really and advantage to a smaller plane, and it's one more thing for the event supervisor to check.
- Unome
- Moderator
- Posts: 4327
- Joined: January 26th, 2014, 12:48 pm
- Division: Grad
- State: GA
- Has thanked: 231 times
- Been thanked: 83 times
Re: Wright stuff minimum size
Yes. See rules 3.d and 3.e. Having just read those rules, I can quote all of the dimensions from memory, but that is left as an exercise for the reader, as site rules specify.GingkathFox wrote:kk, prolly gonna make a peanut plane with large wings. Any warnings ("don't make the wingspan over _ cm!")?Unome wrote:As far as I can tell (from a quick reading of the rules), there are no minimum dimensions. There's not really a point to setting out minimum dimensions for this event since there's not really and advantage to a smaller plane, and it's one more thing for the event supervisor to check.
-
- Member
- Posts: 6
- Joined: January 2nd, 2018, 3:16 pm
- Has thanked: 0
- Been thanked: 0
Re: Wright stuff minimum size
Thanx!Unome wrote:Yes. See rules 3.d and 3.e. Having just read those rules, I can quote all of the dimensions from memory, but that is left as an exercise for the reader, as site rules specify.GingkathFox wrote:kk, prolly gonna make a peanut plane with large wings. Any warnings ("don't make the wingspan over _ cm!")?Unome wrote:As far as I can tell (from a quick reading of the rules), there are no minimum dimensions. There's not really a point to setting out minimum dimensions for this event since there's not really and advantage to a smaller plane, and it's one more thing for the event supervisor to check.
Who is online
Users browsing this forum: No registered users and 0 guests